Belly Boat Guideline Drifter Kick Boat | CzechNymph.com
HomeShopBelly BoatsBelly Boat Guideline Drifter Kick Boat

Belly Boat Guideline Drifter Kick Boat

Belly Boat Guideline Drifter Kick Boat Belly Boat Guideline Drifter Kick Boat
Buy: Belly Boat Guideline Drifter Kick Boat
Code Type Unit price Stock Shipping Quantity
Code: GL70426 Type: Standard Unit price: 379,9 EUR Stock: 1 pcs Shipping: promptly -+
Code: GL70427 Type: Combo: Boat + fins + pump Unit price: 449,9 EUR Stock: 1 pcs Shipping: promptly -+

Fishing from a belly boat is both fun and effective! You get to places you could not reach from shore and you get closer to the fish than using a boat.

High-floating, stable pontoon boat that has gained great reputation around Europe. The Drifter has floatation devices in both the seat and the backrest which gives good security, small pack volume and great comfort while fishing.

In addition, each of the two bladders have double air compartments for floatation and extra safety. The front of the boat has a mesh bottom that acts as a storage area for extra gear carried in a waterproof bag and there are several D-rings, straps and double storage pockets on each side to keep essential tackle close to hand.

The Drifter comes with the bladders mounted and ready for use. It has a smart pocket configuration, Velcro rod holders, larger line apron with Velcro fastening, metal D-rings, non slip fabric on seat edge and a a grey/hot red/black color combination.

Two products available:

Guideline Drifter Kick Boat Standard: only belly boat

Guideline Drifter Kick Boat Combo: belly boat including pump and fins

  • Weight: 8 kg.
  • Max loading capacity: 140 kg.
  • Dimensions:
  • Width: 120 cm.
  • Length: 140 cm.
  • Height: 35 cm (pontoons), 45 cm (at the prow) & 60 cm with back rest raised.

Notice:

When you pump up your Drifter for the first time, the pontoons have a tendency to twist. Take it a little carefully and make sure that the valves are centered in each hole. Do not fill valve 1 to max and then valve 2 to max. Valve 1, which is the middle security chamber, fill it so it is firm but not hard. Most of the air is pumped into valve 2, which is the main main chamber. Do not fill the float ring with more air than you can easily push your finger about 1 cm down into the pontoon. When it is warm outside, the air expands and makes the pontoons considerably harder. If you forget your float on land in the sun, the pontoons can explode. Empty your float on at least half of the air if you store it outdoors in the sun and heat.

When it is warm and sunny, the air within the tube expand. If you misplace the pontoon in the sun or store it in a warm place the tubes might explode. When You store it inflated, make sure that you have no more than half of the needed air in it.

 

Producer: Guideline
Send an e-mail Close
 
E-mail
Subject
Message